Rca SSM-1750 User Manual

Owner’s ManualPlease read before using this equipment.SSM-1750 4-Channel Stereo Audio Mixer32-3008.fm Page 1 Thursday, April 6, 2000 4:03 PM

10OperationImportant: Note the AUX LEVEL setting,so each time you want to mix thatsource you can set the control to thecorrect setting. Notes:• If it

11Operation4. Set the desired channel volume levelslide control to the preset position. 5. Adjust CUE LEVEL to a comfortable lis-tening level. 6. Star

12OperationNote: We recommend you not adjust theGAIN controls after you have preset the in-puts as some sound imbalance could occur. Setting the Sound

13OperationThe echo is applied to the sound before allthe inputs are mixed. Set ECHO to MIC to turn on the echo effectfor the microphones and the AUX

14CareˆCareTo enjoy your mixer for a long time:• Keep the mixer dry. If it gets wet, wipe itdry immediately.• Use and store the mixer only in normalte

15SpecificationsˆSpecificationsInput Sensitivity/ImpedanceDJ MIC (XLR jack) ... 1.5 mV, 60

32-300804A00Printed in ChinaRadioShackA Division of Tandy CorporationFort Worth, Texas 76102Limited One-Year WarrantyThis product is warranted by Radi

2ˆContentsFeatures ...

3Care ... 14Repla

4FeaturesˆFeaturesYour RadioShack 4-Channel Stereo Audio Mixer is a sophisticated control center, perfect formixing sound from multiple playback sourc

5Features9 Assign Controls— let you select the in-put sources to be mixed. 10CROSS FADER — lets you smoothlyswitch between two input sources. 11SOUND

6PreparationˆPreparationPRESETTING THE CONTROLSWarning: A sudden high output from themixer could damage your hearing, especiallyif you use headphones,

7OperationConnecting Microphones You can connect two microphones (not sup-plied) to the mixer. Connect a microphone with an XLR plug toDJ MIC on the t

8Operation6. After you finish mixing, turn down thevolume on the output audio devices, turnoff the input and output audio devices(amplifiers, tape dec

9OperationNotes:• If it was necessary to set the channelvolume level slide control to 10 to get areading of up to 0 on the VU meter, thenslide it down