RCA RCR311S User Manual download pdf (Page 4)

The ON•OFF key powers components on and

off. It also lights up to serve as an indicator

light, providing feedback for various functions.

When a valid key is pressed, the illuminated

ON•OFF key remains lit as long as the key is

pressed and turns off when the key is released.

The ON•OFF key also blinks in Programming

Mode or in Menu Mode to provide feedback.

Illuminated ON•OFF Key

ON•OFF

(BLINK)

Programming the Remote

Your universal remote can operate a variety of brands of

components. In order for your universal remote to control

your components, you need to program the remote with the

codes that match the components (See Code Lists enclosed).

These codes enable the remote to communicate with your

components. Each brand and each component has its own

“language,” and, by programming the correct codes into your

remote, you tell the remote to “speak the same language”

as your components.

There are four methods you can use to program your remote

to operate your components: Brand Code Search and Entry,

Direct Code Entry, Manual Code Search and Entry, and Auto

Code Search and Entry. Most components can beprogrammed

in one of these four ways. Try them in the order listed.

In order to control combo units, like TV/VCRs or TV/DVDs,

you must program the individual corresponding component

keys to control each part of the combo unit. Once

programmed successfully, the TV key controls the TV

functions on your unit, and the VCR•DVD key controls the

VCR or DVD functions, respectively. There is a specific

section in the Code Lists for combo units. The codes in this

section should be tried first, using Direct Code Entry on the

TV and VCR•DVD keys. If this is unsuccessful, follow the

normal programming methods for both the TV and the

VCR•DVD keys.

Programming Methods

Brand Code Search and Entry

If your brand is listed in the Brand Code List (See Code Lists

enclosed), you may be able to program your universal remote

by searching through only the Code Lists for that specific

manufacturer. Brand Code Search and Entry can be the quickest

method to program your remote, if your component (TV, VCR

and/or DVD, satellite receiver and/or cable box) is one of

those brands listed.

If your brand is not listed in the Brand Code List, use one of

the other programming methods: Direct Code Entry, Manual

Code Search and Entry or Auto Code Search and Entry.

Follow these instructions to program your remote using

the Brand Code Search and Entry method.

TIP: To exit without saving at any point in

the Brand Code Search, press and release the

GO BACK key.

1. Manually turn on the component you want the remote to

control (TV, VCR, DVD, satellite receiver or cable box).

2. Locate the Brand Codes in the Code Lists and keep it handy.

Note: If you press an invalid key during the Brand Code

Search, the remote does not respond and the search times

out after two minutes. When the search times out, the

illuminated ON•OFF key blinks four times and turns off. The

last programmed code under that component key is retained.

GO BACK

RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 4

1 2 3 4 5 6 7 8 9 ... 47 48

Comments to this Manuals

No comments

RCA RCR311S User Manual Page 4

Comments to this Manuals

Related products and manuals for Remote controls RCA RCR311S