Rca VR725HF User Manual download pdf (Page 48)

References

Sometimes problems can be easily solved by Lheckin;; a lew basic things.

Check below before you call for help or take your VCR to an Authorized RCA

VCR Servicenter.

Trouble Checks

TVouble

No power

VCR does not respond to remote

Remote no longer controls an RCA TV

Remote no longer controls a compatible TV, cable

box, or auxiliary component

VCR only responds to VCR2*LD button on

remote

Poor or no picture for normal TV viewing

Snowy or no picture during playback

Streaks in picture during normal playback

Plug VCR into an operating outlet.

Check connections.

Here's what to try:

Remove batteries and hold down one or more buttons for several seconds to

drain the microprocessor inside the remote and reset it. Re-install the

batteries and try remote again.

Press VCR1 (VCR2»LD) to set remote to control the VCR. See page 16.

Aim remote at VCR with no objects between them.

Change batteries.

Press TV to set remote to control a compatible TV. See page 17.

Reprogram remote for RCA TV. See page 17

Press TV, AUX, or CABLE to set remote to control the corresponding

component. See pages 17-19.

Aim remote at TV with no objects between them.

Reprogram remote after batteries have been changed. See pages 17-19.

Change batteries.

Check setting of REMOTE CONTROL: VCR1A/CR2 feature. See page 16.

• Press TV»VCR to turn VCR indicator off.

• Switch TV to an active channel.

• Check antenna connections.

• Press TV»VCR to turn VCR indicator on.

• Check TV channel selected (3 or 4) to make sure it matches the channel

selected with 3 CH. 4 switch on back of VCR.

• Check TV's fine tuning.

• Check video cable connections between VCR and TV monitor.

• Set TV monitor to video input channel.

• Try another tape.

• Some snow/streaks are normal during search, stop action, frame advance,

and slow-motion playback.

Time counter not working or not advancing

during search mode.

Will not record or play

Press one of the TRACKING buttons to move streaks up or down for the best

picture.

Check tape — it may be worn out or of poor quality.

The time counter does not advance during unrecorded portions of tape.

When an unrecorded segment of tape is encountered, the time counter will

hold its count until recorded material is detected again.

A minus (-) will appear in front of the time if you rewind the tape farther

back than a counter reading of 0:00:00.

No cassette in VCR.

Eject and reinsert cassette.

Broken tape — try another cassette.

' VCR is in pause mode. Press PLAY»PAUSE on the VCR or PAUSE on the

remote.

• Pressing JOG SHUTTLE during playback places VCR in pause mode. Press

PLAY«PAUSE on the VCR or PLAY on the remote, or PAUSE to return to

normal playback.

...........

........

.....

......................

continued on next page

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Comments to this Manuals

No comments

Rca VR725HF User Manual Page 48

Comments to this Manuals

Related products and manuals for Video recorders Rca VR725HF