Rca ProV600 User Manual download pdf (Page 23)

21

Recording

• The camcorder will automatically

turn off if it remains in record-

pause for three minutes. Slide the

POWER switch upward to turn the

camcorder back on.

• The camcorder has a beeper that

beeps for certain functions. The

beep indicator flashes with the

beeps. To turn off the beeper, press

and hold STOP and PLAY together

until BEEP OFF appears on the

monitor or in the viewfinder.

Details on page 27.

7. Zoom in and out.

• Zoom in and out using the T and W

zoom lever.

8. Review what you have recorded.

• Press and quickly release REW to

review the last few seconds of your

recording.

• Press and hold REW or F.FWD to

visually see what you have re-

corded. Release the button to begin

recording at that point.

9. When you are finished, slide the

POWER switch upward to turn off

the camcorder, close the monitor,

and replace the lens cap.

1. Attach a power supply.

Attach the adapter/charger or charged

battery.

2. Remove the lens cap and attach it

to the handstrap.

3. Slide the POWER switch upward to

turn on camcorder.

The CAM indicator will light and the

camcorder will enter record-pause.

PAUSE appears in the viewfinder or

on the LCD monitor.

4. Insert a tape.

• Press EJECT to open the cassette

compartment.

• Insert the cassette with the safety

tab facing up and the tape window

facing out.

5. Adjust the position of the LCD

monitor or viewfinder for

comfortable viewing.

• If you are using the LCD monitor,

use the BRIGHT control to adjust

the brightness of the monitor.

• If you are using the viewfinder,

adjust the eyepiece focus control

for your vision.

6. Start and stop recording.

• Press and release the REC START/

STOP button (thumb trigger) to

start recording. REC appears on

the LCD monitor or in the

viewfinder.

• Press and release the thumb trigger

again to stop recording. The

camcorder is now in record-pause.

PAUSE appears in the viewfinder

or on the LCD monitor.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 62 63

Comments to this Manuals

No comments