RCA RCR311B User Manual download pdf (Page 4)

Programming Methods (continued)

STOP

ON•

OFF

•OFF

ON•OFF

(BLINK)

ON•OFF

(BLINK)

SAT

•CBL

VCR

•DVD

11. Once you have found the correct

code, you must save that code by

pressing and releasing the STOP

key. The illuminated ON•OFF key

turns off. You must press the

STOP key to save the code or the

correct code will not be stored!

12. To confirm that the component key

is programmed with the correct

code for maximum functionality,

test the component. Attempt to

control a variety of the

component’s functions with the

remote. If some of the features of

your component do not work, try

programming the remote using the

direct code entry method.

Direct Code Entry

To program your universal remote to control your components

using the Direct Code Entry Method, follow the steps below.

1. Manually turn on the component

you want the remote to control.

2. Locate the enclosed Code Lists.

Find the list for the component you

wish to program. Find your

component’s brand. You will see a

listing of four-digit codes for each

brand. If your brand isn’t listed, use

one of the Code Search methods to

program the remote control. (Refer

to pages 7 and 9 for Manual and

Auto Code Search methods.)

3. Press and hold the component key

(TV, VCR•DVD, SAT•CBL) you

wishto program. The illuminated

ON•OFF key turns on and

remains on. If you release the

component key at any time

during the Direct Code Entry

procedure, the illuminated

ON•OFF key blinks four times,

and the process is exited.

4. While holding down the

component key, consult the Code

Lists for the four-digit code that

corresponds to your component’s

brand and use the number keys

(0-9) on the keypad to enter it.

While you are pressing the

numbers, the illuminated

ON•OFF key turns off.

5. After the fourth number is

entered, the illuminated ON•OFF

key turns on. At this time, release

the component key. If the

illuminated ON•OFF key turns

off, you have entered a valid code

and have followed the correct

procedure for Direct Code Entry.

If you enter a code number that is not

in the Code Lists or you do not follow

all of the steps for Direct Code Entry,

the illuminated ON•OFF key blinks

four times when the component key

is released. This is an indication that

a programming error has occurred.

In that case, repeat the Direct Code

Entry process from step 3.

TIP: Throughout the programming

of each key, be sure to keep the remote

pointed at the IR sensor of the

component you are currently

programming the remote to control.

6. To confirm that the component key

is programmed with the correct

code for maximum functionality,

test the component. Attempt to

control a variety of the

component’s functions with the

remote. If some of the features of

your components do not work, try

programming the remote with a

different code in the list until you

find the code that allows the

remote to control the majority of

your component’s functions.

Different codes can provide

different levels of functionality.

7. Remember to enter the code for

future reference in the box provided

in the Code Retrieval section of this

manual (See page 12).

Manual Code Search and Entry

If your component’s brand isn’t listed in the Code Lists, or if

you have tried all of the codes for your brand and the remote

does not operate your component, try one of the Code Search

methods below—Manual Code Search or Auto Code Search.

Both Code Search methods cycle through all of the codes in the

Code Lists in the event that your component’s code is listed

under another brand.

The Manual and Auto Code Search methods may take a long

time because the remote searches through all of the codes in its

memory for the code that operates your component. Therefore,

if your brand is listed in the Brand Codes or the Code Lists,

first try the Brand Code Search or the Direct Code Entry

methods described on pages 4 and 6.

TIP: To exit without saving at any

point in the Manual Code Search, press

and release the GO BACK key.

1. Manually turn on the component

you want the remote to control.

Note: If you press an invalid key

during the Manual Code Search,

the remote does not respond and

the search times out after two

minutes. When the search times

out, the illuminated ON•OFF key

blinks four times and turns off. The

last programmed code under

that component key is retained.

2. If you are programming the remote

to control your TV, satellite receiver

or cable box, go directly to step 4.

3. To program the remote to control

a VCR or DVD. The VCR•DVD

key can control only one

component, either your VCR or

your DVD. To program your

remote to control either your DVD

or your VCR, you must first put the

remote in the proper programming

mode. Follow these directions

before proceeding to step 4.

a. Press and hold the VCR•DVD

key. The illuminated ON•OFF

key turns on.

GO BACK

VCR•DVD

ON•OFF

(BLINK)

RCR311B_NA_IB_REVB_K4.qxd 7/27/04 11:46 AM Page 6

1 2 3 4 5 6 7 8 9 ... 24 25

Comments to this Manuals

No comments

RCA RCR311B User Manual Page 4

Comments to this Manuals

Related products and manuals for Remote controls RCA RCR311B