RCA RCR311B User Manual download pdf (Page 7)

5. Starting with the number 1 key,

press and release each number key

on the keypad in the following

order (1-9, then 0). The number

that causes the illuminated

ON•OFF key to blink is the first

number of the code. As you find

each number of the code, refer to

the code boxes below and write

them down for future reference.

Note: All TV codes begin with the

number 1; all VCR codes begin

with the number 2; all DVDs, the

number 3; and all satellite

receivers and cable boxes, the

number 5.

6. Repeat step 5 until you have

retrieved all four numbers in

the code.

7. After the fourth number is

retrieved, the illuminated ON•OFF

key blinks briefly, then turns off.

8. To exit the Code Retrieval Mode,

press and release the GO BACK

key at any time.

9. If you press an invalid key during

the Code Retrieval process, the

remote will not respond. If you do

not press a valid Code Retrieval

key (TV, VCR•DVD, SAT•CBL,

INFO, GO BACK), Code Retrieval

times out after 15 seconds. The

illuminated ON•OFF key blinks

four times, and then turns off.

1312

Because this remote controls more than one component, you

must first “tell” the remote which component you wish to

operate. That means, if you wish to operate your TV, you

must first press the TV key to put the remote in the TV Mode.

The remote stays in the chosen component mode (such as TV

Mode) until you change it. If your remote is in TV Mode, you

must change the mode in order to operate your DVD or VCR,

satellite receiver or cable box. For example, if you are in VCR

Mode, and you wish to turn off your TV, you must press the

TV key first before pressing the ON•OFF key.

Using the Remote to

Control Your Components

GO BACK

TV CODE

SAT·CBL CODE

ON•OFF

(BLINK)

VCR

DVD CODE

Code Retrieval (continued)

On-screen Menus

Sleep Timer (Select Models Only)

This feature automatically turns off your TV at a duration you

choose from 1 to 99 minutes. The Sleep Timer only works if

you have found a code that controls your TV. The timing

mechanism for the Sleep Timer is built into your universal

remote control. To program the Sleep Timer, follow these steps.

PROGRAMMING THE SLEEP TIMER

1. Press and release the TV key.

2. Press and hold the SLEEP key for

three seconds. The illuminated

ON•OFF key turns on.

3. Release the SLEEP key.

4. Using the number keys, enter the

desired time in minutes (from 1-99

minutes). To set the timer to a

number under 10 minutes, first

press 0 and then the desired

number (e.g., 05 for five minutes).

The illuminated ON•OFF key

blinks with each keypress.

SLEEP

ON•OFF

Accessing and Selecting Menu Items

Today’s advanced components use on-screen menus to help

you navigate through all their features and functions. While

this remote cannot access every menu system of every

component model, it does offer some menu functionality.

To use a component’s on-screen menu system, you first have

to put the remote in Menu Mode.

1. Make sure your components are

turned on and your TV is set to

the component’s input. (Use the

INPUT key to toggle through

video sources when in TV mode.)

2. Press the component key whose

menu you want to access.

3. Press the MENU key. The

illuminated ON•OFF key blinks,

indicating you are in the Menu

Mode.

4. Use the VOL+/- and/or CH+/-

keys to navigate through the

on-screen menu system.

5. To make a selection from

the on-screen menu, press

the MENU or OK key to

select the highlighted item.

TIP: If the remote doesn’t respond,

check to see that the illuminated

ON•OFF key is still blinking. Note: it

times out after 20 seconds. If this

happens, just press the MENU key

again, and then retry your selection.

Exiting a Menu Mode

The remote automatically times out of Menu Mode after

20 seconds of inactivity (no keys being pressed). At that

time, the remote clears the displayed menu from the TV.

If you want to exit the Menu Mode yourself, press the

corresponding component key on the remote (TV, VCR•DVD,

SAT•CBL). The illuminated ON•OFF key turns off.

VOL & CH

ON•OFF

(BLINK)

SAT•CBL

VCR

•DVD

ON•OFF

(BLINK)

RCR311B_NA_IB_REVB_K4.qxd 7/27/04 11:46 AM Page 12

1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

Comments to this Manuals

No comments

RCA RCR311B User Manual Page 7

Comments to this Manuals

Related products and manuals for Remote controls RCA RCR311B