RCA RCR311B User Manual download pdf (Page 5)

b. While holding down the

VCR•DVD key, press and

release the number 2 key on the

keypad to control a VCR or the

number 3 key to control a DVD.

The illuminated ON•OFF key

turns off.

c. Release the VCR•DVD key. The

illuminated ON•OFF key blinks

four times and then turns off.

Your remote is now either in

VCR or DVD Programming

Mode, depending on which you

chose. Proceed to step 4.

4. Press and hold the component key

(TV, VCR•DVD, SAT•CBL) you

wish to program. The illuminated

ON•OFF key turns on and

remains on.

5. While holding the component key

down, press and hold the ON•OFF

key. The illuminated ON•OFF key

turns off.

6. After holding down both keys for

three seconds, the illuminated

ON•OFF key turns back on.

7. Release both keys. The illuminated

ON•OFF key remains on.

TIP: Throughout the programming

of each key, be sure to keep the remote

pointed at the IR sensor of the

component you are currently

programming the remote to control.

8. Press and release the ON•OFF key

repeatedly, waiting 4 seconds

between each key press, until your

component turns off. Each time

you press the ON•OFF key, the

illuminated ON•OFF key blinks,

and the next code is sent. This

process continues until all of the

codes in the Code Lists have been

searched. If your component turns

off, you have found the correct

code. (If it cycles through and the

illuminated ON•OFF key blinks

four times and turns off, all codes

have been searched. The Manual

Code Search method is exited.)

9. Once your component turns off,

you have found the correct code.

You must save the new code by

pressing and releasing the STOP

key. The illuminated ON•OFF key

turns off. You must press the

STOP key to save the code or the

correct code will not be stored!

Testing the Code for

Maximum Functionality

To confirm that the component key is programmed with the

correct code for maximum functionality, it is necessary to test

the component. If some of the features of your component do

not work, different codes in the list can be tried until you find the

code that allows the remote to control the majority of your

component’s functions. Different codes can provide different

levels of functionality. Follow these steps to test for maximum

functionality.

Programming Methods (continued)

ON•OFF

(BLINK)

ON•OFF

(BLINK)

ON•OFF

SAT

•CBL

VCR

•DVD

ON•OFF

STOP

VCR

•DVD

VCR

•DVD

ON•OFF

(BLINK)

1. Once the code has been stored (see Manual Code Search and

Entry Method page 7), use the remote to attempt to control a

variety of the component’s functions. If the code that has been

stored controls the majority of the component’s functions,

programming is complete. If the code stored does not give

maximum functionality, you will want to try another code.

2. In that case, repeat the Manual Code Search and Entry

Method from step 1. When the component turns off for the

first time, do not press the STOP key, which would store the

code. Instead, wait 4 seconds, with the unit now off, continue

to press the ON•OFF key repeatedly until the unit turns back

on. Once the unit turns back on, you have found another

code that operates the component. Press the STOP key.

3. Test the functionality again by attempting to control a variety

of the component’s functions. If the code that has been

stored controls the majority of the component’s functions,

programming is complete. If the code stored does not give

maximum functionality, you will want to try another code.

4. Repeat the Manual Code Search and Entry Method from

step 1. Each time a code turns the component on or off, you

have found a code that operates the remote and needs to be

tested for maximum functionality. Continue through the

code lists, cycling through the codes you have already tried,

until you find one that offers maximum functionality.

Auto Code Search and Entry

The Auto Code Search and Entry Method enables the remote

to automatically search through all the codes in the Code

Lists for the one that operates your component.

Note: The Manual and Auto Code Search methods may take a

long time because the remote searches through all of the

codes in its memory for the code that operates your component.

Therefore, if your brand is listed in the Brand Codes or the

Code Lists, first try the Brand Code Search or the Direct Code

Entry methods described on pages 4 and 6.

TIP: To exit without saving at any

point in the Auto Code Search, press

and release the GO BACK key.

1. Manually turn on the component

you want the remote to control

(TV, VCR, DVD, satellite receiver

or cable box).

Note: If you press an invalid key

during the Auto Code Search, the

remote does not respond. If you do

not press a valid Auto Code Search

key (TV, VCR•DVD, SAT•CBL,

ON•OFF, GO BACK, PLAY,

REVERSE, FORWARD, STOP),

the search times out after two

minutes. When the search times

out, the illuminated ON•OFF key

blinks four times and turns off. The

last programmed code under that

component key is retained.

2. If you are programming the remote

to control your TV, satellite receiver

or cable box go directly to step 4.

3. To program the remote to control

a VCR or DVD. The VCR•DVD

key can control only one

component, either your VCR or

your DVD. To program your

remote to control either your DVD

or your VCR, you must first put

the remote in the proper

programming mode. Follow these

directions before proceeding to

step 4.

GO BACK

RCR311B_NA_IB_REVB_K4.qxd 7/27/04 11:46 AM Page 8

1 2 3 4 5 6 7 8 9 10 ... 24 25

Comments to this Manuals

No comments

RCA RCR311B User Manual Page 5

Comments to this Manuals

Related products and manuals for Remote controls RCA RCR311B